well i have owned this yj for quite a long time and finally got the go ahead from my wife to redo it. i am a bodyman/painter by trade for the past 26 years. i will attempt to add photos, but will not bore you with all the dissassembly stuff. right now all the body panels have been removed and refinished, interior is all removed as well. dash was dismantled and dyed satin black, did the heater upgade and heater core.
i am down to refinishing the tub and firewall.
jeep was origanally soft top and half doors, bought used full doors and welded the common tears back together then replaced all hardware and weather strips blah blah blah. bought a used hard top, removed all the glass and repaired a few areas then sprayed raptor on it. also bought some nice custom fit neoprene seat skins.
reason for the blue balled name is from my wife, she said if i continue to spend as much time working on that darn jeep, i will figure out the meaning the hard way.
any ways if i am able to add pictures let me know what you think, if i am not able please tell me how. the pics will not be in any specific order.
also note that i have owned this jeep for a long time and it has zero rust, some of the pics of the interior may look like rust but it is the old adhesive that was holding down the carpet. the inside will raptored once all the paint work is done
Jeep looks great, you should have done the grille black
Have you checked the output on those ebay projectors? The light output was horrible when I tried them.
powerline, i have not tried out the headlights as of yet... still finishing up the assembly before i put power to everything. as far as the grille goes it used to have the chrome overlay and i hated it. went with the blue on it as i was looking for a mono-chromatic color scheme. i have built alot of vehicles in the past and just seem to like the look of solid colors with black trim.
Did you buy or make the smoked marker lights?
and could you give some details on them. im gearing up for my build and i like the smoked lights up front.
Love your rig!
well i have the roll bar painted and installed, everything done in the motor compartment. down to raptor lining the inside of the hardtop, installing the top, seats and glass. still have to charge the a/c and have exhaust done too
got new roll bar pads installed yesterday, going to spray the inside of the hardtop with upol raptor today. seat belts are installed so i should be able to bolt the seats in with the top next week end.
going to install the hard top and full doors tomorrow, have a little of satin black paint work to do to the seat risers before the new blue and black cover king seat covers go on. will have the windshield and side glasses installed in the middle of the week too. i hope to have time to bleed the clutch this weekend as well as add and coolant and bleed the cooling system..... jeep has not run for about 6 months
doors and top installed today, also added all fluids and it started right up and ran smooth. the glass will be installed the middel of next week... ended up driving a 3/8 drill bit through one on my fingers so i guess i will call it a day. a few more things to put together then the new wheels and tires.
windshield and hardtop side glasses installed this week, tomorrow i will install the liftgate glass. also the brown truck brought me a new rock crawler bumper and door panels. tomorrow is a big day as i am getting closer to completion... seats and other accessories tomorrow then a few minor things like window tint, exhaust and wheel and tires
well i am almost complete, i installed the seats , liftgate glass and new door panels. i have added a few more pictures.... feedback would be appreciated. thanks
thanks for all the positive feedback, keep it comming and i will continue to add pictures and answer questions. as far as the bumper goes it did have some shipping damage to the mount flanges that will need to be addressed before i install but the quality seems fair. thanks for all the feedback
you are doing it right !!!! excelent!!!!!!! one day i will follow yours steps
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Jeep Wrangler Forum
9M posts
468K members
Since 2005
A forum community dedicated to Jeep Wrangler owners and enthusiasts. Come join the discussion about reviews, performance, trail riding, gear, suspension, tires, classifieds, troubleshooting, maintenance, for all JL, JT, JK, TJ, YJ, and CJ models!