Couldn't find a solution in a search. Problem is my passenger door soft upper hits the door surround in the rear and the top-rear. There is a little extra space in the front. It's as though the soft upper needs to move forward about a quarter inch and down a little in the back to allow the door to close without sticking.
The steel lower door seems to be aligned OK.
The opposite is true on the driver's side -- there is more room between the soft upper and the surround in the rear. The driver's side door opens, closes, and seals correctly though so it's not a problem.
There does not seem to be any way to adjust the door surround that I can see. Is the proper fix to bend the steel frame of the door upper until it centers more properly in the surround? Anyone do this?
Thanks in advance.