Removing the TJ seat bracket!
Having the seat off and laid down on the shop floor, it's ready to be disassembled.
It was time to get out the drill, The TJ seat is mounted to the bracket with 6 heavy duty rivets.
Simply drill out the head of each rivet, give them a whack with a flat-head and a hammer, and next thing you know, the bracket is off. (Trust me, its a bit more painstaking than it sounds)
Removing the YJ seat bracket!
The YJ seat bracket is held on with 4 Torx screws, fairly straight forward.
Note: When the YJ bracket is off, lightly lube it up while you have the chance, however be careful when sliding the slider. If both sliders do not slide at the same rate, things get a little twisted up, and it can fall apart.