Jeep Wrangler Forum banner

Lets see your 35s on a 2.5 inch lift

995K views 1K replies 618 participants last post by  JTPhoto JK 
#1 ·
Lets see your 35s on a 2.5 inch lift ::popcorn::
 
#858 ·
Ok so why does my jeep (92) on 35's with a 3" skyjacker and supposedly 3" body lift look lower than many of these pics with jeeps on 2.5 and 3" lifts?? Is it my fenders maybe? I say supposedly on the 3" body lift because it was on when I got it. It definitely has a body lift because the bushings are obvious and I'm sure it's at least 2" but very likely 3". Must be my fenders?
 

Attachments

#868 ·
Because most people, me included, like a level stance. I hate the front end rake.
 
#871 ·
Also not a fan of rake. Hoping the lift I just ordered doesn't have too much rake, or none at all. Rake on a JK doesn't make sense to me. The lightly tilted the windshield to try and make it just a little more aerodynamic than a cardboard box, and then add rake, and the windshield is almost straight up and down again :nonono:

Anyone know if the MC 2.5" will have rake?
 
#874 ·
I guess I fall ouside the norm, my rancho had no rake on my jku, and I just recently added and inch to the rear. My pinch seam originall was perfectly level with my hard top on and up 3/4 with it off. It was ok , I just preferred a little rake on the unlimited. I agree I like less with the 2 door...
 
#895 ·
Glad you two have a sense of humor. If you are looking for a full width front bumper, let me suggest the Rampage Recovery. Rick at Quadratec hooked me up and it looks killer, is built like a tank and goes nicely with the factory fender flares. Not to mention you can get it in gloss black.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top