Jeep Wrangler Forum banner

Plasti dip stock jk rims

10K views 31 replies 25 participants last post by  GZilla 
#1 ·
Any one have pics of stock jk rims done in plasti dip black
 
#6 ·


bought 4 cans and blacked out the grill as well. still had some left over. did 5 coats on each wheel and used a tooth pick to peel the center cap. Worked perfectly! I did some tape on the tire but not much. I removed the wheels to do the project and used washers in the lug nut holes. If you don't then when you tighten down the nut it will pull on the plasti dip. The pic was taken last november and I went through the winter (temps in the neg teens and lots of salt and snow). They still look like the day I sprayed the dip on. Very impressed with that product!
 
#19 ·
Did my stock Sport S 17s the other day. Four coats on all five wheels about two cans. Did it with them on the jeep except the spare. Shoved paper towels in the slots to keep overspray of brake parts and blue taped the lugs.



Land vehicle Vehicle Car Jeep Automotive tire




Land vehicle Vehicle Automotive tire Tire Car
 
#26 ·
The lights are Anzo 55w halogens that I bought on Craigslist; the bar is Mopar that I got on Amazon. Pretty happy with the results and didn't spend a bunch of money. 😎
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top