Any of you guys or gals that have body armor on your Wranglers or are looking to put body armor on this is the thread for you. Post all your pics of your body armor on your jeeps. include brand or how you fabricated it
Gen Rights all around. They're solid. I've scraped them on canyon walls and rubbed them all over rocks and v-notches - like an extension of my sliders. Love 'em.
Big Red:'93 YJ, SOA, Deaver leafs, Fox shocks, Dana 44 front w Reid Racing knuckles, Ballistic Fab high steer, Detroit, Superior shafts & Warn hubs, Ford 8.8 (31spl/discs), "Super 88" kit, Detroit, Dana 300 w Low Max 4:1, 35" BFGs, Allied beadlocks, Mastercraft seats, Currie bumpers, Warn sliders, Gen Right fenders
homemade armor. rockers are machine broke 1/4" plate (2 1/2x 5 1/2" ID), rears are 3/16" x 4" strap (top) with sawzall cut 3/16" plate bottom. had a buddy "roll" some 3/16" for the 3.5" radius corners then welded all together. front fenders are BTF kit "weld it yourself" - you can't make them yourself for what they charge for the kit. rear lower valance is machine broke 3/16" - 2 x 3 1/2" ID welded in for beef and cj tailgate conversion hinge support.
Got the bars built and welded on to my channel this evening going to weld a support off the bottom lip of the channel that will tie into the body mount right under the door then countersink 4 bolts through the channel and body on the top and bottom. Then it will be time to paint and install. The front is straight with the fender seam and the back follows the angle of the fender flare.
Shawn 1994 Sahara 4.0 5 speed 33 MTZ's,GTE front bumper, DIY rocker guards with steps, Ramsey pro9000, 4:10s,e-locker in rear,3" body,3" skyjacker lift,flowmaster super 44
Soon to come= Rear bumper w/ tire swing
Poison Spyder Rickochet rockers,Trailgate,Crusher corners ,Defenders, full length side plate,bfh bumper,Savvy doors,Under cover fab deep cover skid and windshield guards(not pictured).All powdercoated blk satin.