So I got a pair of second hand no name lights and was told that they did work before they were pulled off the rig. I went to test them out by hooking them up straight to the battery without a relay or fuse just to see how bright they are and got nothing. I know I had a good ground and power. I used a piece of wire for one of the jumpers and a test light as the other. When I touched the ends to the battery I got a dim light on the test light and nothing from the HID. I checked the bulbs and they look fine and don't see any damage to the wires or internals of the lights or ballist. I would hate to buy a relay, switch, fuse and get everything setup and find out they don't work. Do I need to have all that stuff to get them work right?