Trouble with Fader... - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > General Jeep Discussions > Communications and Electronics

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-02-2011, 06:08 PM   #1
Jeeper
 
1992wranglersahara's Avatar
 
Join Date: Oct 2006
Location: Northwest New Jersey
Posts: 163
Trouble with Fader...

Hey all -

I have a Pioneer DEH-1100MP head unit (Pioneer DEH-1100MP CD receiver at Crutchfield.com) in my '90 base model YJ. I used an after market wiring harness in the install process.

I also replaced the front speakers a while back with some replacement 4X6's that I bought from Crutchfield.

I just got a cheap speaker box for Christmas (RTS3000T - Speaker System Enclosure) and installed it this weekend.

I used 16 gauge speaker wire from the head unit wire harness to the speaker box in the rear, following the color code of the wire harness (green, green/black, violet, violet/black) for the left and right rear speakers.

For some reason, I cannot get the fader to work correctly after the install. If you adjust the fade setting to 0, you hear music out of the front and rear speakers - grand. If you adjust the fade to complete front, then you still hear music out of the front and rear speakers - bad. If you adjust the fade to complete rear, then there is no sound at all, just complete silence from the whole system.

???

Help me, please...

Thanks -

__________________
1990 YJ - Base Model

What's the worst that could happen?
1992wranglersahara is offline   Quote Quick Reply
Old 01-02-2011, 07:36 PM   #2
Jeeper
 
1992wranglersahara's Avatar
 
Join Date: Oct 2006
Location: Northwest New Jersey
Posts: 163
update...

I am reading that the head unit has 14 watts RMS system power (50 watts peak). The speaker system has 60 watts RMS system power (300 watts peak). Is it just that I need an amp to drive up the head unit wattage?

__________________
1990 YJ - Base Model

What's the worst that could happen?
1992wranglersahara is offline   Quote Quick Reply
Old 01-02-2011, 07:47 PM   #3
Newb
 
Join Date: Jan 2011
Location: oklahoma city
Posts: 8
Most likely there is something wrong with the deck.. it should function right if it was wired correctly. You may know but here are the wire colors.
FL- white /white black
FR- grey/grey black
RL-Green/Green black
RR- purple/purple black.
bighornsahara is offline   Quote Quick Reply
Old 01-02-2011, 08:47 PM   #4
Jeeper
 
1992wranglersahara's Avatar
 
Join Date: Oct 2006
Location: Northwest New Jersey
Posts: 163
That stinks.
__________________
1990 YJ - Base Model

What's the worst that could happen?
1992wranglersahara is offline   Quote Quick Reply
Old 01-28-2011, 04:18 PM   #5
Jeeper
 
1992wranglersahara's Avatar
 
Join Date: Oct 2006
Location: Northwest New Jersey
Posts: 163
Figured out the issue. I had installed the after-market wire harness from Crutchfield when I installed the new Pioneer head unit. That harness was made for the stock radio in a 90 base model YJ, which had no rear speakers. I disconnected the rear speaker wires from the radio to that harness, and then attached them to the rear speaker wire coming from my rear speakers. Voila! Done.
__________________
1990 YJ - Base Model

What's the worst that could happen?
1992wranglersahara is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need trouble codes Resolved 2002Apex TJ Tech Forum 0 07-27-2009 09:07 AM
external slave conversion trouble...clutch trouble talerian YJ Tech Forum 2 08-07-2008 06:13 PM
Trouble with the Locking Pin soupy1957 JK Tech Forum 14 07-07-2008 09:42 AM
Transmission Trouble? soupy1957 General Jeep Discussion 2 05-26-2008 06:07 PM
1994 2.5 wrangler engine trouble codes ftamboner1204 YJ Tech Forum 2 10-27-2007 11:12 PM



» Featured Product

All times are GMT -5. The time now is 06:35 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC