Wiring line output converter - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > General Jeep Discussions > Communications and Electronics

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 05-13-2013, 09:08 PM   #1
Jeeper
 
Join Date: Feb 2013
Posts: 43
Wiring line output converter

I am putting an amp and sub that I have lying around my garage in my 97. I do not want to change out the headunit, mostly because it is a tape deck that I don't think anyone will want to steal, and because I like the factory original look.

I am looking at the line output converters so I can just tap into the soundbar speakers. Some of them have a remote output turn on for the amp. My question is, do I run a constant 12V to the converter or a switched 12V. It sounds like the only time the remote out will turn on the amp is when there is an actual signal on the speaker input. If this is true, will I be draining my battery if just tap the 12V from the battery that I am running to the amp?

lowreyfarris is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 11:45 PM.



Jeep, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC