Jeep Wrangler Forum banner

Welder in Tucson for dana 30 gussets?

838 views 4 replies 3 participants last post by  cradled 
#1 ·
I posted this in the SW forum but I guess I should've put it here.

So anyways, can anyone recommend a person or business to weld in gussets on a JK dana 30?

Thanks
 
#2 ·
Are you changing the ball joints as well? I've heard from two different places that if you buy new Synergy ball joints and install them at the same time they will charge the same 2 hours for doing the gussets and the ball joints. If they do just the gussets it still takes 2 hours of labor so they don't melt the teflon. Something to think about.
 
#4 ·
Sorry for the confusion, I'm in Albuquerque. If they remove the ball joints they can weld the gussets w/o stopping for the ball joints to cool. Then when the 'C's are nice and warm the ball joints are easier to install.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top