Does anyone know the site to download the FSM for a 99 Wrangler.MY FSM for my 97 is not the same as the wiring from the 99 motor and trans I am putting in.I had to change the whole wiring harness from my 97 to the 99 harness and my 97 had aftermarket cruise and I can not find the same white w/orange strip wire to hook the speed signal wire from CC to.BTW do not let anyone tell you that a 99 engine will drop right in a 97 because the injectors and most other plugs are different.Anyway if anybody know what color the speed signal wire is on the 99 harness or were to find the PDF version to download the FSM please let me know.Thanks!!!!!!!!!

Here you go, FSM and more. Index of /allmanuals/Jeep/TJ

I tried that and it says We can't open the web page you requested..... Will it open for you???? I had that saved in my favs but it has not opened for me for 2 days now.

I had no problem and downloaded it to check it. I uploaded it to a server and you can download it from this link

GigaSize.com: Host and Share your Files

If you are using firefox or the AOL browser that may be your problem. A vast majority of webpages are optimized for internet explorer and do not render well in other browsers.

If this does not work I have a second option to get it to you.

Thanks very much!!!!! That worked great!!!! Yeah I am using Avant browser.It is like Firefox and Mozilla.I may just go ahead and install the latest version of explorer because I have been having problems with this browser for a few months but to stubborn to get the newer explorer.I like this one cause it has more add ons than explorer.Anyway thanks again!!!!

workes for me. Thanks for the info

You can load IE but not make it your deafult browser this way if you have a problem with your favorite browser all you need to do is run IE to see if that works and then go back.

I didn't realize it was on the web. I paid something like $70 for it back when I first bought my Jeep.

I always buy the FSM for any car I purchase.

I just did that earlier today and even IE 7 will not bring that site up????? I think the problem is in my service provider.I have been haveing more trouble than normal for a few days now but the whole internet has been slow for a few months now and I have DSL.Just got my PC out of the shop and still really slow.IDK maybe my modem or router.It seems to be the web and not the PC itself

Yeah I done the same on the 97 Wrangler FSM but then found the site that is linked here and have used it for a while now but now I can not bring up the site but hey Atthehop is a champ and sent the download.Thanks again Atthehop!!!!!

Sherman, how you been. I am heading to Harlan in a few weeks.

My pleasure slf41002

Hey Tony I been good!!!How about you??? In a few weeks huhhhhhh!!! I may get back with ya on that if you don't mind another for the run.Right now I have mine tore down.Next time you see it, it will be a 5 speed.I bought a rolled 99 for the motor and tranny.At this point ,mine is sitting at my garage with no drivetrain As you know from our last Harland run mine overheated well it started doing it anytime you were on the highway above 60MPH and really got nasty if that 60MPH was an up hill incline.Then at the end of last summer I sank mine in a very deep mud hole and got water in the tranny and it had started to slip so I have chose to take care of both at once.The 99 I bought has 70K on it.In two days I have both engines/trans/case on the ground along with wiring harnesses and computers plus swapped the brake and clutch pedals out and stripped the 99 down to the frame.Rick wants to put a car body on that 99 frame.Can you say Redneck Grocery Go Getter!!!!I will hollar back

That sounds like one hell of a project, sounds like we created a beast at the last harlan trip.

Let me know, we will be there the 16th-19th of July.

Yeah I have the 4.56 gear sets to go in ASAP and hope to order the SYE and CV-DS along with the adj control arms as well.Yeah I have found as stated a never ending work order

Well I can not even get this site up on my laptop.It is new with the latest IE and still will not bring it up.If you don't mind could you send the link to me again with gigasize because that has expired also.I would like to have this on my laptop for work but can not figure out how to send it to my LT from my PC with out downloading to a disc and uploading from that.

Try this link [link deleted at jamesdeanblvd's request]

That came up to a log in page????

Wow, that's weird. I clicked the link to verify just before I posted the link, and it opened fine. Now, it's asking for a log in. If you pm me I may be able to send you the pdf file that I saved via e-mail.

Woops!! I must apologize for any inconvenience that I may have caused to the individual that owns the web site that I posted a link to. I forgot that it was a private link. Again, I apologize.

Thanks again,
Chuck

How did you get this link? Were you invited?

I see you weren't invited, you answered that question the same time I asked it. Maybe you should have asked first.

What year are you looking for.

Actually I would like to have it for 97 and 99 if you have them.

If you do a search on this forum, you should be able to find more links. I have also found them on a site called Download PDF PDFTown.com | Free Download PDF and eBook

I found it when I Googled for the manuals.

I have them. PM me with your email address and I can work out how to get them to you.

You wouldn't be giving out my link would you? I'd hate to have to put a password on it. And lock everyone out.


SLF if you haven't gotten them yet please send me a pm.

No not at all. I uploaded my copies to a separate server for him to download. I would never give out someone elses information.

i could really use the FSM for 97 TJ, any help?

PM me your year and I will PM you a link for it.