4 wheel won't disengage or 4 wheel indicator stays on. - Page 2

NAVYCHIEF · 02-15-2009, 05:38 PM

what's the secret to opening your attachments?

amerijeep · 03-09-2009, 09:48 PM

I don't know why the pics are gone and I don't know if I still have them. I'll search them out, but I believe they are gone.

amerijeep · 03-09-2009, 09:59 PM

Found the vacuum diagram.

amerijeep · 03-09-2009, 10:08 PM

I can't find any more pictures. I can't take new pictures right now. My YJ has been in the shop for awhile and I won't get it back for a week or two. It's being painted among other things.

Helomech · 08-05-2009, 10:07 AM

Ok, so I figured I'd bring this one back up. I have a similar problem. However, a little different. While in 2wd, the 4wd indicator on the dash is lit up. When I pull the stick back to 4wd, the light on the dash goes out. rrRR?

95muddyYJ · 08-17-2009, 11:16 PM

Ok I just got a 95 yj and the 4wd linkage was loose but even when loose or tight it still shifted into 4wd and out of it just fine but I have no dash indicators that tell me if I am in 4wd or 4lo? Am I facing another different problem or could it be the vaccum still. I will trace them tomorrow since it seems pretty straight forward.

strungxout · 09-24-2009, 04:07 PM

My 4x4 light is always on... I decided to try it out so I went to the nearest trail and still couldn't tell if it was working cause my Jeep doesn't struggle in 2wd. I tried it in low range and is seemed ok, then went to take it out of low range and it was stuck. After a lot of force I finally got it out, but it seems like the 4x4 only works half the time.

plac · 10-22-2009, 09:42 AM

Quote:

Originally Posted by Helomech

Ok, so I figured I'd bring this one back up. I have a similar problem. However, a little different. While in 2wd, the 4wd indicator on the dash is lit up. When I pull the stick back to 4wd, the light on the dash goes out. rrRR?

your two vacuum lines reversed?

NAVYCHIEF · 10-22-2009, 12:18 PM

these help?

03-09-2009, 09:48 PM	#32
amerijeep KD5DHR (General) Join Date: Apr 2005 Location: Mississippi. Posts: 3,888	I don't know why the pics are gone and I don't know if I still have them. I'll search them out, but I believe they are gone. __________________ *To all who serve, Thank You.*

03-09-2009, 09:59 PM	#33
amerijeep KD5DHR (General) Join Date: Apr 2005 Location: Mississippi. Posts: 3,888	Found the vacuum diagram. Attached Thumbnails __________________ *To all who serve, Thank You.*

03-09-2009, 10:08 PM	#34
amerijeep KD5DHR (General) Join Date: Apr 2005 Location: Mississippi. Posts: 3,888	I can't find any more pictures. I can't take new pictures right now. My YJ has been in the shop for awhile and I won't get it back for a week or two. It's being painted among other things. __________________ *To all who serve, Thank You.*

08-05-2009, 10:07 AM	#35
Helomech Jeeper Join Date: Aug 2009 Posts: 38	Ok, so I figured I'd bring this one back up. I have a similar problem. However, a little different. While in 2wd, the 4wd indicator on the dash is lit up. When I pull the stick back to 4wd, the light on the dash goes out. rrRR? __________________ Robert Running Springs, CA 1993 YJ 4.0 5Spd Go Ahead, Get Pistoph!

10-22-2009, 12:18 PM	#39
NAVYCHIEF Jeeper Join Date: Sep 2008 Location: ocean shores, wa Posts: 1,078	these help? Attached Thumbnails __________________ 1994 RENEGADE "CLUNKERISAMO"

02-15-2009, 05:38 PM	#31
NAVYCHIEF Jeeper Join Date: Sep 2008 Location: ocean shores, wa Posts: 1,078	what's the secret to opening your attachments?

08-17-2009, 11:16 PM	#36
95muddyYJ Jeeper Join Date: Aug 2009 Location: Indianapolis, Indiana Posts: 23	Ok I just got a 95 yj and the 4wd linkage was loose but even when loose or tight it still shifted into 4wd and out of it just fine but I have no dash indicators that tell me if I am in 4wd or 4lo? Am I facing another different problem or could it be the vaccum still. I will trace them tomorrow since it seems pretty straight forward.

09-24-2009, 04:07 PM	#37
strungxout Jeeper Join Date: Jul 2009 Posts: 37	My 4x4 light is always on... I decided to try it out so I went to the nearest trail and still couldn't tell if it was working cause my Jeep doesn't struggle in 2wd. I tried it in low range and is seemed ok, then went to take it out of low range and it was stuck. After a lot of force I finally got it out, but it seems like the 4x4 only works half the time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
04TJ Will not engage 4 wheel drive.	04SilverTj	TJ Jeep Wrangler Forum	10	12-18-2008 05:22 PM
Negative offset rims question	Willis	General Jeep Discussion	4	07-25-2007 04:49 PM
Steel Wheel Specials	4x4ROCKSHOP	Vendor Showcase	2	05-23-2007 04:40 PM
87' gettin into 4 wheel drive help	Odd is he	General Jeep Discussion	1	03-15-2006 03:25 PM
2000 TJ Wheel and Tire Expert Opinions	PaulW	TJ Jeep Wrangler Forum	7	08-14-2005 10:21 AM