90 Electrical Problems

ericchurchflw · 04-08-2007, 03:04 AM

I have a problem with my jeep. Whenever I turn on my headlights none of my lights in the rear work including my signals. When I dont have the headlights on the brake lights work, but when I use the signals both of them come on at the same time only in the back. If someone could please help me with a possible solution?

jeepdrvr101 · 04-08-2007, 10:36 AM

You have a crossed wire, or have the wrong bulb in one or more sockets. have you replaced any of the bulbs lately?

Mike

jeepfanatic · 04-11-2007, 09:23 PM

check for some poor grounding, or some loose connections. this are the most common causes why headlights, jeep turn signal won't work. a burned bulb should also be replaced with a new one.

daddyjeep · 04-13-2007, 12:14 PM

you might want to check your turn signal fluid. Sometimes it can give you all kinds of problems...AH nevermind!!!! I can't pick on the new guy. I would definately look at you bulbs if you have replaced one lately. Putting them in wrong can make things weird.

Joes · 04-15-2007, 02:49 AM

When u do find out the problem it wouldn't hurt to put some dielectric grease on the contacts..

04-08-2007, 03:04 AM	#1
ericchurchflw Newb Join Date: Apr 2007 Posts: 1	90 Electrical Problems I have a problem with my jeep. Whenever I turn on my headlights none of my lights in the rear work including my signals. When I dont have the headlights on the brake lights work, but when I use the signals both of them come on at the same time only in the back. If someone could please help me with a possible solution?

04-13-2007, 12:14 PM	#4
daddyjeep Jeeper Join Date: Apr 2005 Location: Smethport Posts: 1,446	you might want to check your turn signal fluid. Sometimes it can give you all kinds of problems...AH nevermind!!!! I can't pick on the new guy. I would definately look at you bulbs if you have replaced one lately. Putting them in wrong can make things weird. __________________ 87 Flatfender YJ, 4.2, Howell TBI, Pacesetter Header, Catco high flow catylatic converter, Flowmaster 40 series, 3" rough Country, 2" shackles, Pro Comp shocks, etc., etc.

04-15-2007, 02:49 AM	#5
Joes Jeeper Join Date: Mar 2007 Location: Black Hills S.D. Posts: 99	When u do find out the problem it wouldn't hurt to put some dielectric grease on the contacts.. __________________ Owner stock 89 Wrangler 4.2,5 speed,,110,000 miles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Clutch Problems and How I Resolved Them	linz	TJ Jeep Wrangler Forum	1	01-28-2009 07:27 PM
95 Wrangler Electrical Problems	BadAzReb75	YJ Jeep Wrangler Forum	3	12-21-2008 06:59 PM
Electrical Problems?	Twitch415	TJ Jeep Wrangler Forum	16	11-12-2008 09:58 AM
Electrical problems	lawdog84	TJ Jeep Wrangler Forum	2	08-01-2008 07:02 AM
electrical problems dash	spanner659	TJ Jeep Wrangler Forum	0	12-03-2007 11:59 AM

04-08-2007, 10:36 AM	#2
jeepdrvr101 Jeeper Join Date: Apr 2007 Location: Pismo Beach, Ca Posts: 15	You have a crossed wire, or have the wrong bulb in one or more sockets. have you replaced any of the bulbs lately? Mike

04-11-2007, 09:23 PM	#3
jeepfanatic Newb Join Date: Feb 2007 Posts: 12	check for some poor grounding, or some loose connections. this are the most common causes why headlights, jeep turn signal won't work. a burned bulb should also be replaced with a new one.