Alright guys i have been reading around the forum for the past few weeks and have made a few decisions and i am looking for some advise on if they will all work and what I am missing and or need.
I am looking at a 2012 Wrangler 2dr. I plan to get one with steel wheels a three piece hard top and 3.73 gears. I hope to have the parts ready to go when i pick up the Jeep and start the mods right away. This is what i am planning so far.
Lift: Teraflex 4" LCG long arm
Shocks: Blistein 5100 front and back
Wheels: 16" Black (have a few ideas haven't decided exactly. suggestions?)
Tires: GY Duratrac 285/75/16 (should i go bigger i think these are 33's)
Driveshaft front and rear: Tom Woods Custom
Front Bumper: JCR Mid Width Prerunner with Full Sink (winch mount)
Rear Bumper: JCR Jk Rear tire Carrier bumper Deluxe W/built in lights
Rock Sliders: JCR Stage 2
Winch: Warn M8000-S
Soft top: Bestop Trek top
I am in NEPA and not real sure what type of wheeling I will be doing for sure. This will be mostly a toy however my work does take me off road at times but i have to travel up to an hour or so to get to these spots so I want to be able to drive the rig on the road as well.
I hope you guys will take a look and give me any advice that will help me put together a great machine. I am willing to spend some money at this point I want to do things right up front and not have to go back and redo things because i missed something.
Thanks in advance for your help. Look forward to getting out there with you guys soon.
Steve
I am looking at a 2012 Wrangler 2dr. I plan to get one with steel wheels a three piece hard top and 3.73 gears. I hope to have the parts ready to go when i pick up the Jeep and start the mods right away. This is what i am planning so far.
Lift: Teraflex 4" LCG long arm
Shocks: Blistein 5100 front and back
Wheels: 16" Black (have a few ideas haven't decided exactly. suggestions?)
Tires: GY Duratrac 285/75/16 (should i go bigger i think these are 33's)
Driveshaft front and rear: Tom Woods Custom
Front Bumper: JCR Mid Width Prerunner with Full Sink (winch mount)
Rear Bumper: JCR Jk Rear tire Carrier bumper Deluxe W/built in lights
Rock Sliders: JCR Stage 2
Winch: Warn M8000-S
Soft top: Bestop Trek top
I am in NEPA and not real sure what type of wheeling I will be doing for sure. This will be mostly a toy however my work does take me off road at times but i have to travel up to an hour or so to get to these spots so I want to be able to drive the rig on the road as well.
I hope you guys will take a look and give me any advice that will help me put together a great machine. I am willing to spend some money at this point I want to do things right up front and not have to go back and redo things because i missed something.
Thanks in advance for your help. Look forward to getting out there with you guys soon.
Steve