Jeep Wrangler Forum - Conversation Between glg20 and Jwolfer
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > glg20

Join Wrangler Forum Today


Conversation Between glg20 and Jwolfer
Showing Profile Comments 1 to 3 of 3
  1. glg20
    09-12-2013 10:28 PM
    glg20
    I soaked them in Kroil and tapped them with a hammer to set up some vibration. Went out this morning and they came right off. So far no broken fasteners. Great owning a southern Wrangler. I purchased a 8 oz bottle of anti seize and have used it on every bolt.

    I have a oem rear hook. Do you have any idea what the bolt length is? I know that they are grade 10.9 M12-1.75. Need to find the correct length.

    Rattle can the door handles today with some Rustoleum. Turned out pretty well.
  2. Jwolfer
    09-12-2013 05:48 PM
    Jwolfer
    Those bolts were pretty tough the first time. Try PB blaster and a breaker bar or an impact driver. That's how I got mine out.
  3. glg20
    09-11-2013 11:29 PM
    glg20
    Got a phone call and hit enter by accident.

    Back to the bumper. The two vertical bolts seem extremely difficult to remove. My TJ is basically rust free. I shot some PB Blaster inside the frame tonite and hopefully hit the bolt. Any suggestions.

All times are GMT -5. The time now is 12:11 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC