Jeep Wrangler Forum - Conversation Between GoldenSahara00 and 97flexy
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > GoldenSahara00

Join Wrangler Forum Today


Conversation Between GoldenSahara00 and 97flexy
Showing Profile Comments 1 to 3 of 3
  1. GoldenSahara00
    How did you change/fool the sensor? I will probably just try to modify the batter bracket, I have a decent amount of room to work with. The way I understand I should be able to pick up a smaller washer bottle at an auto store to use.
  2. 97flexy
    07-16-2012 11:18 PM
    97flexy
    Yes I have the hi-lined MCE fenders I used the stock inner fenders. I still have a washer fluid jug from a CJ7 in it bolted to the inner fender in the same location. All I relocated was the battery and fooled the battery temp sensor to always charge at 14.4v, which is great for winching cause then your voltage won't drop to 8 or 7v. and take all day to recharge.I moved the battery to the back and installed a passenger side front seat next to a cargo rack, which is bolted over the battery. I aligned the seat to fit with the rear inner fender and made a plate to bolt the lower point thru the tub without pulling thru the tub.
  3. GoldenSahara00
    you have the MCE's hilined right? did you re use the inner fender, and what all did you relocated, just the washer fluid bottle and the battery tray or?

All times are GMT -5. The time now is 09:04 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC