Hey... I did some more checking and found a few conflicting listings on the torque specs. Some say 23 ft lbs and others say 28 ft lbs. 5 ft lbs isn't that much, if we wanted to heir on the side of comfort I'd say we should go to the higher spec. But, just to be sure, I sent Mr. Bransford an email and asked him to call if he knew the specs. I'm sure he does. See you in a bit.
Cool! Stu's website says 23 ft lbs for the TC bolts but I'm gonna dig a little more.
One more thing. I was thinking... My welder has pretty good penetration on 3/16 steel. I may not be able to completely weld it but I can put in about 4 or 5 nice heavy spot welds to hold it in place until you can get it welded properly.