Jeep Wrangler Forum - Conversation Between SilverSport and John23
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > SilverSport

Join Wrangler Forum Today


Conversation Between SilverSport and John23
Showing Profile Comments 1 to 5 of 5
  1. John23
    04-15-2012 01:49 PM
    John23
    I am supposed tto install two new wires from the jumper harness that came with the lights in those cavities. The directions asume those cavities are free to use.
  2. John23
    04-15-2012 01:48 PM
    John23
    The problem is that the pins are already removed and there are wires in the 11 & 16 positions. I am totally confused
  3. SilverSport
    Ok, got it. TIPM is the Totally Integrated Power Module or fusebox. So you removed the plastic pins from 11 and 16. What do the instructions say to do next?
  4. SilverSport
    Refresh my memory, what is the TIPM?
    If you removed the plastic pins from cavity 11 and 16 of the D connector and there are already wires going into it, sounds like the instructions are going to have you plug into those cavities. Give some more info and I may be able to help.
  5. John23
    04-15-2012 09:11 AM
    John23
    Ok thanx for the help in geting D connector unconnected.

    Now the next Problem.

    Instructions say to remove plastic pins in cavity 11 & 16 of the d connector. Pins are already removed and there are already wires running to 16 & 11. What the heck do I do now???

All times are GMT -5. The time now is 05:02 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC