Jeep Wrangler Forum - Conversation Between Jervboy and WeaselM29c

Go Back   Jeep Wrangler Forum > Jervboy

Join Wrangler Forum Today

Conversation Between Jervboy and WeaselM29c
Showing Profile Comments 1 to 3 of 3
  1. Jervboy
    04-19-2012 05:50 AM
    If you are mounting this in the bumper, just a couple of notes depending on if you have been looking at some other build threads. Not many guys made note of where on the reails to mount your plate. Make sure you are not all the way forward, give yourself some space for your fog lamps. I did not have a lot of room because I mounted mine forward, I did this because of the second important item, where are you mounting the fairlead? If you are cutting a big enough hole in the bumpers to mount to the plate, no problem. I mounted to the outside of the plastic bumper. That would be the other issue, some guys mounted outside like I did but used cheezy spacers. If you do, you need to use something with some balls as a spacer. I actually had my friends machine shop available so I used some aluminum block stock. Four inches long x two inches high x 1.5 wide. It is firm against the mount and the fairlead, the fairlead is going no where when torked on if you get my drift.
  2. Jervboy
    04-19-2012 04:02 AM
    Right on!
  3. WeaselM29c
    Doing a build using the HF plate. Thanks for the head's up.

All times are GMT -5. The time now is 11:37 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner