Jeep Wrangler Forum - Conversation Between Fawbio72 and jadampowell
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > Fawbio72

Join Wrangler Forum Today


Conversation Between Fawbio72 and jadampowell
Showing Profile Comments 1 to 2 of 2
  1. jadampowell
    I used gutter guard (from Home Depot) cut each section, then used wire tie anchors also available at HD i cleaned the inside of grill with acetone then glued the wire tie anchors into place and allowed the 24 hrs to dry and set, glue was 5 min epoxy from auto parts store i used about 40 of the wire tie anchors to hold everything down...over the winter a couple of the anchors came ungloed but not real noticabls come spiring ill glue em back down
  2. Fawbio72
    01-10-2012 04:14 PM
    Fawbio72
    I see on an older thread that you might have made your own grill inserts? I have a 97 TJ, I was wondering if you could tell me your steps on how to do it? What fasteners you used, etc. Thank you!

All times are GMT -5. The time now is 07:49 AM.



Jeep, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC