I have a Roadmaster Sterling aluminum towbar that I use. I was not impressed with many of the "adapters" that are out there to attach the towbar to either the "D" rings or the adapter brackets that need to be added to the Jeep so I fabricated my own bracket/crossmember. It works great as an attachment point for the towbar as well as serves as some much needed added protection for the electronic swaybar disconnect actuator. The bracket mounts below and just behind the front bumper so it does not interfere with my approach angle at all. You can see pictures of it during the build process and after completed and powder coated in my build thread. There is a link to it in my signature. Thanks. Mike.