Jeep Wrangler Forum - View Profile: WeaselM29c
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > Members List

Join Wrangler Forum Today

WeaselM29c WeaselM29c is offline


Profile Comments

Showing Profile Comments 1 to 2 of 2
  1. Jervboy
    04-19-2012 06:50 AM
    If you are mounting this in the bumper, just a couple of notes depending on if you have been looking at some other build threads. Not many guys made note of where on the reails to mount your plate. Make sure you are not all the way forward, give yourself some space for your fog lamps. I did not have a lot of room because I mounted mine forward, I did this because of the second important item, where are you mounting the fairlead? If you are cutting a big enough hole in the bumpers to mount to the plate, no problem. I mounted to the outside of the plastic bumper. That would be the other issue, some guys mounted outside like I did but used cheezy spacers. If you do, you need to use something with some balls as a spacer. I actually had my friends machine shop available so I used some aluminum block stock. Four inches long x two inches high x 1.5 wide. It is firm against the mount and the fairlead, the fairlead is going no where when torked on if you get my drift.
  2. Jervboy
    04-19-2012 05:02 AM
    Right on!

About Me

  • About WeaselM29c
    Glendale, Az,USA
    Boat shop owner
    WF Local
    Vehicle 1
    1960 M151 (Military)
    Vehicle 2
    1944 M29c Weasel (Studebaker)


Total Posts
Profile Comments
General Information
  • Last Activity: 05-11-2013 06:52 PM
  • Join Date: 11-17-2011
  • Referrals: 0

All times are GMT -5. The time now is 06:19 PM.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC