|02-12-2011 12:08 AM|
|bwilburn||X2 rusty knutt pbblast the heck out it well before you attempt removal|
|02-10-2011 12:31 PM|
|02-10-2011 12:21 PM|
|Rubicon2||Be careful... the nutserts in the frame can be notorious for spinning when you go to unbolt the transmission/transfercase skid.|
|02-10-2011 09:39 AM|
|shrubeck||How much lift are you putting on?|
|02-10-2011 05:40 AM|
|Mallia420||Yea im doing it after work one night from 5 to 8 durring our night hours so i didnt wanna rip intoit and not be able to get it done and have people pissed my jeep is disabling their lift wanted to see how much i could do by myself untill i get a 2nd set of hands|
|02-09-2011 09:52 AM|
It will hurt your ego if someone sees you in a stock Jeep with a transfercase drop... that and possibly bottoming out the slip yokes like Rusty said.
Is there a problem with doing it at the same time as the lift?
|02-08-2011 11:15 AM|
|Rusty Knutt||Just make sure your shafts don't bottom out the slip yokes. That could be ugly.|
|02-08-2011 09:00 AM|
Anyone think doing the tcase drop before the lift will hurt anything