|03-06-2011 09:29 PM|
|TDFDiesel||3m pin stripe remover wheel, it's the best tool for removing stickers or decals.|
|03-06-2011 09:17 PM|
I use a gum rubber wheel in my air drill gets rid of the decal and the edge that seems to build up around the decal.
|03-06-2011 08:25 PM|
|mdr67||I used a heat gun on low to soften up the residue, then used brake cleaner and a cloth to wipe the gunk away. Couple coats of wax, and we're good as new. Use caution not to get brake cleaner on anything plastic, it will discolor!|
|03-06-2011 08:01 PM|
|Jhart83||Thanks everyone.....trying the clay bars.|
|03-06-2011 07:20 PM|
|InfernoGirl||Yep clay bar and a bit of polish should fix it right up....|
|03-06-2011 07:15 PM|
|Masterdale||A very mild abrasive like Meguiar's Cleaner Wax should do it. It's the Swiss Army Knife of drive way detailing help.|
|03-06-2011 07:10 PM|
|shewoolf||My first thought would be wax build up. a good clay baring would take care of that.|
|03-06-2011 06:50 PM|
Issue with sticker removal
So I have a 2007 sahara unlimited and wanted to replace the sahara fender stickers with some other decals I purchased. I was able to get the left side off and cleaned up just fine. The ride side has become a different story. The decal came off just fine. However, where the decal was there seems to be almost and indent of the stickers outline. I have tried goo gone, and a few other things and it doesnt come off. This is not sticky at all, but you can easily catch your fingernail on it. What if anything can I do to get rid of this outline????
Thanks to all in advance.