|03-15-2011 01:32 AM|
j/k. I have often wished various vehicles I've had still went with the floor switch for high/low beams, but never really did anything about it. I'll be watching this thread!
|03-14-2011 08:24 PM|
Yep. I was thinking that I'd use the floor switch unless I was shifting at the time & needed a foot on the clutch then I'd just use the stalk.
I was even thinking about placing it on the side of the footwell rather than the floor & hitting it with the side of my left foot. It could go anywhere, really.
|03-14-2011 08:20 PM|
|dbbd1||Nice thought. Yeah, keep the high beams "on" at the stalk then control them from the footswitch. I may have to look into this. I will post what I come up with.|
|03-14-2011 08:05 PM|
I am the anti-electrician. I can't even plug in a lamp without getting shocked & starting a fire. That's why I was asking who had tried it before.
|03-14-2011 04:47 PM|
|BladeMechanical||Actually, I have a foot switch I found in my dad's garage, still in bag. I've thought of using it for some auxilliary lights on my bumper or engine theft switch but never as a dimmer. Laters,|
|03-14-2011 04:26 PM|
|shrubeck||Be the first to do it. Take pictures, and do a writeup. Wiring it so both the foot switch and hand switch control the lights will take a little figuring. Just make sure you only have one beam on at a time.|
|03-14-2011 10:59 AM|
|meyers||It would be pretty simple just wire it inline with the high beam circuit. I know you can by the generic foot switches, usually right in the parts stores in the "HELP" parts line section|
|03-14-2011 10:37 AM|
|MLaborde||Nobody has installed a foot switch as a dual switch?|
|03-13-2011 10:18 PM|
Has anyone installed a headlight dimmer switch on the floor?
I used to love the dimmer switch being foot operated in my older cars. Has anyone ever installed a 2nd dimmer switch on the floor? I would want to keep the hand switch also.