|03-23-2011 10:13 AM|
|InfernoGirl||As 530 mentioned, the bs on stock wheels is a major problem when you decide to upsize tires..... And the cost of media blasting and powder coating stock wheels hardly seems to be worth it in my opinion. But, it's your $ and your Jeep Lots of nice wheels to choose from out there... Spend a few weeks looking. If you really want to keep stockers then you'd probably be better off $ wise to just buy some used ones that someone took off. Most folks practically give them away. I'd guess you have Ravines or Canyons on your Sahara.|
|03-22-2011 11:19 PM|
|Gorving3||I'm assuming the tires will have to be removed from the wheels before any type of blasting is done. I'll have to do some checking to see if there's anyone in my location does that kind of blasting, no sand.|
|03-22-2011 11:16 PM|
|03-22-2011 12:03 AM|
|randy and teri||
if they are aluminum, there is no reason you cant use aircraft stripper on them to remove the clear coat, then polish them. if you can, instead of reclearing them with paint, you should get them clear powdercoated over the polished finish.
the other option as already stated is to have them blasted with glass beads. it will leave a clean, semi-smooth finish. do not sand blast them, it will ruin them. its too abrasive on a soft substrate like aluminum. the other option is to soda blast them. that is gentle enough to remove paint from body parts without warping them so im sure it would be fine on your rims.
|03-21-2011 11:40 PM|
|meyers||Best way to fix them is have them bead blasted and the re clear coated.|
|03-21-2011 11:30 PM|
I got 4 stock rims sitting at my house that are in good condition If you wanna buy em lol
Here's a pic
|03-21-2011 09:30 PM|
|530ktm||Seems as though this happens to most of the older stock wheels including mine. I liked the stock wheels too but they have bad back spacing so you can not run bigger tires with out rubbing problems unless you run spacers and I am no fan of those either. I decided to get new polished aluminum Pro Comp wheels because I like the polished look, not chrome, with proper back spacing and nice big tires and I am very happy I made the change. I bought my tires and wheels from the 4 x 4 place that did my gearing, etc. and they gave me a good package deal.|
|03-21-2011 08:51 PM|
Stock aluminum wheels corroding under clearcoat
I have a 2001 Sahara and the stock aluminum wheels for the last 2-3 years have started corroding under the clearcoat starting outward from the Jeep center emblem. I've been told there is no way to peal off this clearcoating and be able to really polish the wheels.
Has anyone been able to clean up their stock wheels, other than buying new wheels? And if that's the only cure, where did you purchase new stock wheels? The wife and I have looked at lots of new wheels in stores but still prefer the original wheels.