|08-09-2007 09:57 PM|
Here's what the tail lamps look now. Maybe I'll have some time this weekend to get some primer & paint, and finish the job.
|08-03-2007 09:28 PM|
I busted 5 of the 6 bolts trying to get the tail lights off. 2 had to be drilled out. The rest gave way grudgingly. There was only minor rust on the body, which I got out easily with a dremel. A little rubbing compound, and a lot of elbow grease took care of the scratches and rust stain. The bracket holes have been filled in a bit with some putty. I'll let it dry overnight, and finish the job tomorrow.
Needless to say, the nasty rusted out brackets are history!!!
|08-03-2007 08:53 PM|
|"W4MAC"||Possible antenna mounts. Maybe the previous owner was a Ham and ran 2 meter and CB, one on each side.|
|08-03-2007 08:42 PM|
You're just screwed. Sell the Jeep and buy an H3, you know you want to... j/k
They look like the brackets for the roof rack. LED lights would be cheaper to install than it would be to repair the cancer. Be careful, it spreads. (the rust, I mean) just in case...
|08-03-2007 08:28 PM|
|Triple88a||Those seem like some brackets used for cb antenas but why would there be 2|
|08-03-2007 04:46 PM|
|foxinthemudd||90 greenbacks give or take some will get you 26 flushmount 4" circular LED's with a harness and gromits, back-up lights, and an aftermarket licence plate light. they look a hell of alot better than the stock lights. just an hour or two of time to install...just a suggestion...|
|08-03-2007 03:54 PM|
|Walkeraviator||The stock lights mounted flush only require time and knowledge... all the parts are already on your jeep.... just a suggestion... otherwise you gotta find a way to repaint and repair that rust stained sheetmetal.|
|08-03-2007 03:42 PM|
|emilior||No mods for a while. The wheels and tires set me back enough for the rest of the year|
|08-03-2007 03:11 PM|
|Walkeraviator||Looks like a good oppurunity to go with a custom tail light setup like we were talking about in teh other thread...|
|08-03-2007 02:48 PM|
|Steelman||I'm 99.997% sure that the previous owner had a roof rack on there. There would have also been mounts near the wind shield hinges as well (whether they left those on or not...)|
|08-03-2007 02:26 PM|
Tail Lamp Bracket
Anyone know what these brackets are for? Mine's completely rusted. I took it out to refinish it, but ended up breaking all 3 bolts holding the tail lamp. Now I gotta go play with my ez-out set, and then see about replacing the 3 bolts.
Here are some pics.
Right tail lamp with the 3 busted bolts. Look at that freakin' rust stain.
Right tail lamp before I started.
Left tail lamp.