|09-30-2007 09:23 PM|
Just measured my control arms.. All 4 stock lower control arms from bolt hole to bolt hole are 15 and 3/4"
Rough country fixed arms for my 00 tj are 16 1/4". All 4 arms are the same length.
|09-30-2007 07:41 PM|
Ok thanks guys that makes sense i wont have enough time for one day to install my kit so i'm trying to get the easy stuff swapped in first so at the end all i have to do is the swap the springs and the shocks and be done w/ it..
I got few hours each day.. but i need the rig every day so i gotta do it piece by piece..
|09-30-2007 07:38 PM|
|AzTJ||^ X2 - just install one at a time. unbolt from frame and axle, remove and replace.|
|09-30-2007 07:36 PM|
|mr4x4||just un bolt on control arm at a time and thats all you have to unbolt|
|09-30-2007 07:33 PM|
Installing lower control arms. Help
Hello all. Any help as far as installing lower control arms is welcome
Do i have to disconnect anything but the stock lower controls arms when installing new Lower Control Arms?
Dont want to end up dropping the axle or breaking something on accident. Write up or installation instructions are welcome too
Thanks in advance