|08-21-2011 08:40 AM|
|Missouri Bound||good luck on that and future projects.|
|08-20-2011 08:17 AM|
|copohawk||I appreciate the response....the threads in the intake were messed up enough that I wasn't sure. I got confirmation from another source...then used the 5/16 (18) tap to clean up the threads for the swap.|
|08-19-2011 08:39 PM|
|Missouri Bound||Taking the bolt to the hardware store is exactly what I would have done. And they are indeed 5/16 (18) thread. I just did a Weber swap about 3 weeks ago and they are supplied with the kit.|
|08-13-2011 10:55 AM|
No one has any answer to this?
Can someone point me in the right direction where to find the info? The search didn't work...
|08-11-2011 08:24 PM|
4.2 carb intake stud size
This is on my 1990 Wrangler with 4.2L. I am swapping to the Motorcraft 2100 carb...and I bought a whole swap kit from ebay seller.
There is a spacer/adaptor with allen head bolts that bolt into the existing carb stud bolt holes on the intake manifold...but they don't want to go in easily.
I am going to use a tap to clean up the threads...but when I search, I can't find the size of the threads. It looks to be a coarse 5/16 (18) thread. I took one of the new bolts to the hardware store and matched it to a nut of that thread pitch.
Can someone please confirm the size for me?