|10-10-2011 10:44 PM|
here is a good place to go for car wiring help
Car Alarm, Car Stereo, Mobile Video, and Cruise Control Info for Installers
here is a link to the wiring diagram. You want the red and the yellow, touch them and your jeep will start. As long as your key isn't gray(means you have a key transponder)
|10-10-2011 01:56 PM|
|Jersey Sahara||Are you trying to make a keyless start or even if not. Look on bulldog securities website. They have wiring charts for almost all vehicles and it should give you the wires you need|
|10-10-2011 01:49 PM|
|09-26-2011 02:07 PM|
Before I go hacking into to any wires, could somebody point out in a photo, which connector,PLEASE ?/! Which circuit? I can fix your Windows OS or build you a PC , but I don't know a heck of a lot about auto electricity and don't wanna find myself with unwanted repairs. I've had searched all of the posts and they give brief descriptions of a red wire and yellow wire coming from the ignition switch. Found 1 circuit , looked at the wiring diagram from Haynes Manual - Just can't put the 2 together from paper to REALITY.
1999Jeep Wrangler Sport/5 speed
|09-22-2011 12:29 PM|
Accessory and Push Button start on 1999 tj...HELP
I would like to know which connector and which wires I need to tap into in order to have 1 spot for accessory and the other a momentary start switch. I would like pictures,please. I have already installed a kill switch on connector 106 'pin #4- Would iot be the same wire?
I would ultimately like to forget about the key altogether ..