|07-17-2006 09:34 PM|
got it done
thanks for the tips--I bought an impact driver and a good torx bit--it worked--I'm good to go.. thanks again
|07-17-2006 01:36 PM|
|mrbigjeep||maybe i should consider one of these torx tools...it was a pain unscrewing the bolts for the first time on my hardtop...but i wont put them that tight again when i put it back on|
|07-17-2006 09:30 AM|
on my 99 dodge i had mag-hytec covers thjat had torix drain plugs. when i pulled them off to sell them i broke a snap-on torx off in it.....so i went to a machine shop....he broke HIS torix off too. ended up having to weld a nut to the doggone thing to get it out.
this has nothing at all to do with your windshield...just letting you know i feel your pain
|07-17-2006 12:45 AM|
I also broke a torx tip on my windshield bolts.
I was using a el-cheapo torx tip when I broke it.
I went and bought a craftsman tip, and have had no problems with it. they will replace it if I break it.
Also, some guys report needing to use some heat to help loosen the loc-tite on the bolts. Heat the torx tip and let it transfer the heat into the bolt.
|07-16-2006 10:57 PM|
|amerijeep||Those torx things bite! I've slowly been replacing mine. As I pull hem out for whatever task, they don't go back in. I use a standard bolt replacement.|
|07-16-2006 10:28 PM|
|bluvikng||Using a good brand name torx bit will greatly help.|
|07-16-2006 08:01 AM|
AN Impact driver and a good quality bit
|07-15-2006 10:42 PM|
need to remove torx head windshield bolts--loc-tited-- broke 2 torx sockets..