|11-23-2011 02:29 PM|
|11-23-2011 01:35 PM|
|Jmugs||Those bumpers are awesome!|
|11-23-2011 12:24 PM|
|md41969||Have had the rear for over a year, good product. Running OME springs and didn't notice any drop once it was on. Only issue I have had is the latch broke but was an easy fix.|
|11-23-2011 11:45 AM|
I measured my JKU before and after I installed the front bumper and it dropped about 1/8".
|11-23-2011 09:18 AM|
As you know I recently lifted my Jeep and replaced the wheels and tires. My first version of my mod was estikated at too high a number to even seriously think about. With some help from the forum members, and some discussions with a number of vendors that support this site, and my local Jeep shop, I was able to reduce that number by a third. I also learned a ton about what is and is not important to the performance of a Jeep. All this took me about 7 weeks. I could have taken longer, but I felt much better about my spend money once philosophy.
Now I have what I want, and it is even more capable than it was when it came home from the dealer.
|11-23-2011 06:34 AM|
Here is the body armor front bumper-fits 2012 with no mods.
|11-23-2011 05:39 AM|
With front and rear bumpers it really comes down to personal opinion on the looks and features like winch compatability and tyre carriers etc.
As for the lift, I would recommend finding a local club and go on a few runs with them with it stock. Let them know you are new at it and they will go easy on you. After a few runs you will find out any weaknesses for your requirements and with suggestions from others will come to a solution.
Dont jump into suspension upgrades, find out what YOU need first, much much cheaper in the long run!
|11-23-2011 12:13 AM|
|11-23-2011 12:12 AM|
I haven't gone off road yet (only owned it since Nov. 12) but I would enjoy some light trail stuff. Don't have any interest in going over rocks, this is my DD afterall.
I agree I probably don't need the spare support, but I like the look of the bumper. Am I running into this too quickly?
|11-22-2011 11:54 PM|
|11-22-2011 11:51 PM|
Like I said, a bumper that light shouldn't affect you too much. Are you planning on a lift down the road? Intend to do any wheeling?
Just curious. Unless tires larger than 33" are in your future, you have no need for a rear bumper with a tire carrier. Could always go with a different brand, save a few hundred $$ for other things you might want.
|11-22-2011 11:39 PM|
|sneck||good price points and nice and light. if thats the look you like, don't see any reason not to|
|11-22-2011 11:35 PM|
Springs are stock, BTW.
|11-22-2011 11:24 PM|
K, here's the poop that I could find:
Body Armor High Clearance Rear Bumper and tire carrier review
Some specs from Amazon:
Exterior:Black Powder Coat unless stated otherwise.
Manufacturer Part Number:JK-19531
OEM Part Number:JK-19531
Sizing and Specifications
Item Weight:65 Pounds
At 65 lbs, it shouldn't cause too much sag on your springs (assuming stock, since you didn't specify). Front and rear together may be a different story. I think the rear has a built-in tire carrier, so it's probably heavier. You can correct any sag they cause with spacers, most likely.
|11-22-2011 10:27 PM|
|Phishe||Oh, and another question for you guys. If I were to put both of those bumpers on, would I need to lift my Jeep at all or will it be OK stock?|
|11-22-2011 09:52 PM|
Body Armor Bumpers
Thinking about these bumpers for my white JK Arctic:
Front: Body Armor JK-19531 - Body Armor 4x4 Front High Clearance Bumper in Textured Black for 07-12 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec
Back: Body Armor 4x4 Rear High Clearance Bumper and Tire Carrier in Textured Black for 07-12 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec
Anyone tried these out?