|02-24-2012 08:47 PM|
|doclouie||Yep that is nothing more than taking the casting imperfections off. The carrier is made by using a sand casting. It leaves a really rough finish, but is cheap to manufacturer.|
|02-24-2012 05:58 PM|
thanks fellas. i feel reasured now.
|02-24-2012 05:32 PM|
|neverfastenough1||They just took the casting imperfections or excess off.|
|02-24-2012 05:19 PM|
|Atthehop||Looks normal. I never saw a one any different. They done give them a smooth finish because it's not required. If big hunks were missing I would think something exploded sometime ago.|
|02-24-2012 05:04 PM|
|C.L.||Maybe they grenaded a ring gear previously and chewed it up with the carrier? Then replaced the ring and ran it a while before selling the whole deal?|
|02-24-2012 04:18 PM|
|02-24-2012 03:17 PM|
all the teeth on both the ring and pinion look very even and normal. no chips, chunks or pits.
and its cool, i understand what you mean about getting what you pay for. these were local on craigslist
|02-24-2012 03:13 PM|
|somis||can you see any wear marks on either side of the ring gear or pinion? when i destroyed my rear carrier it was all wear on the inside of the case. I dont know what would be rubbing and grinding on the outside of the carrier but that does not look normal. You have to remember when buying discounted parts, you get what you pay for. Not talking down, i just always question and take caution when seeing something that should cost much more for so cheap|
|02-24-2012 02:42 PM|
chewed up carrier?
picked up a d30 4.11 ring and pinion with carrier for $50. after getting it today i see the outside of the carrier is all marked up. this doesnt look like normal wear to me. can anyone elaborate?