|03-28-2012 11:15 PM|
|busemans||i cannot remember what i used when i pulled that spare head i have. maybe a brake wrench and also the crow's foot on some of them|
|03-28-2012 10:41 AM|
|P0234||I'll see if I can shoot a quick video to show what's going on.|
|03-27-2012 10:43 PM|
|Master4th||Any pictures, Im not sure which ones your talking about.|
|03-27-2012 09:18 PM|
|03-27-2012 06:38 PM|
|busemans||can you get it with a crow's foot? when you torque with a crow's foot though, make sure the foot is at a 90 from the torque wrench or you are changing the level arm length and your torque will not be what is indicated|
|03-27-2012 01:52 PM|
12pt 1/2" socket for cylinder head? Need one that fits...
Has anyone found a socket that works for the head bolts with the studs on them? The regular bolts are no issue. I got the head off using a socket that sort of fit, but it was either fit on the bolt or have the extension seated in the socket. This really isn't going to work for torque-ing it down.
I've tried Sears, HD, Lowes, no one seems to have on that is tall enough for the stud extension, or if they are tall enough, the hole in the end isn't machined big enough for the stud.
Hoping for something I can order online instead of driving around aimlessly again.