|04-21-2008 05:44 PM|
|04-20-2008 09:55 PM|
|nregas1||x4 on the cowl method. but i just drilled holes from inside the cowl channel, one to engine compartment and an adjacent one to drop down behind dash. just be careful whats on the other side before you drill.|
|04-20-2008 08:59 PM|
|Tinker||X3 on under the cowl, just lay the windshield back and chase yer wires under it and you can pop off the dash top panel for easy access to run the wires behind the dash.|
|04-20-2008 08:48 PM|
|Rawkon||yup under the cowl is what i did too|
|04-20-2008 08:44 PM|
I routed mine under the cowl.
|04-20-2008 08:36 PM|
|4point||Do a search on it, there have been a couple of that have done it and posted a write up on it.|
|04-20-2008 08:21 PM|
KC daylighter windshield mount question
i recently bought some KC daylighters to put on my windshield but the package did not comewith directions on how to run the wire to the battery. do you have to drill a hole to run the wires or do you route it another way? i have the kc mounting brackets also. i want it to look as best as possible so i dont want the wires to be too visible.