|04-23-2008 01:29 PM|
|BADBlue||Thanks guys. It's not the first time i have changed it, and i have reused the nut before and have had no problems. Just can't find that socket but now i can pick one up. Thanks again.|
|04-22-2008 10:30 PM|
|jpdocdave||it is recommended to replace the nut, the theory is it will lock down only once, and can vibrate and lose torque over time. i've seen a couple out of a great many, come back a little loose, and caused damage to pinion bearing. i always use a little blue thread locker and reuse the nut, and never have a problem|
|04-22-2008 09:43 PM|
its a 1 1/8"
its fine to reuse the nut.
get an impact wrench or a big breaker bar, its gonna be snug
|04-22-2008 09:32 PM|
|4.0l sahara||ya I wouldn't worry about it but it's one of those things that isn't that big of a deal.|
|04-22-2008 09:28 PM|
|wheelin352||iv always reused mine after taking it off|
|04-22-2008 09:21 PM|
|4.0l sahara||I've ben told that and it's on a few gear web sites. Don't know exactly why.|
|04-22-2008 09:14 PM|
|04-22-2008 09:12 PM|
|4.0l sahara||Don't remember size but pinion nuts are a 1 time use item.|
|04-22-2008 08:08 PM|
Dana 35 Pinion Nut?
Need your help. Need to replace the pinion yoke and seal on my dana 35. Does anyone know what size deep socket i need to remove the pinion nut?