|05-01-2008 08:33 AM|
JKS 1.25" BL
JKS 1" BMML
JKS Quicker Discos
JKS Adj trackbar front/rear
OME HD lift - springs and shocks
Essentially the Ultimate kit, though it was pieced together over time. Only thing I'm missing is the JKS adj control arms.
|04-30-2008 05:48 PM|
|Triple88a||2" bl.. came with relocation bracket for the steering and also came with extension hose for the gas fill hose. I gues you can go to some hardware store and look for a 3" long metal pipe and use that. For the steering relocation bracket.. mine was a block with few screws that mounted right by the drivers fender. One bolt went in from the top and there was another one from the side. Dont remember exactly how.|
|04-30-2008 05:43 PM|
|hulkboy||i beleive he is running what is comperable to the dpg ultimate kit.. same kit i will be running soon... once i get those springs and shocks in...|
|04-30-2008 04:47 PM|
erickpl....what lift you running?
|04-30-2008 04:26 PM|
My filler hose is tight too with the JKS BL. I just got my hand up in there from underneath (moved the wheel well liner out of the way) and slowly tightened down the 4 screws around the fill opening.
As for the steering, my angle was changed a bit too. Wasn't a problem - still isn't 2 years later.
|04-29-2008 01:38 PM|
|hulkboy||ok so i figured out the gas tank problem.. but after a bL is there supposed to be such a huge angle for the steering linkage?? mine almost looks as if it wouldnt even turn... i havent started the car to turn the wheel yet as im on the mml install at the moment.. just wondering if the angles are to be that extreme..|
|04-29-2008 09:49 AM|
jks body lift install... please help!!
ok so i started the body lift last night because i just couldnt wait.. all these parts just laying around in the garage... any who i started the body lift and finished it up only problem is i had to disconnect the gas fill hose cause i heard it starting to crack that plastic.. now i cant get it to re-attach.. i tried to carefully pull on it to see if it would get me some more slack... but nothing...
is there anyone w/suggestions as to how i can get more slack out of the hose???