|04-29-2008 01:34 PM|
|04-28-2008 09:07 PM|
Exactly where is the resistor behind the glove box. My fan works on 1,3, and 4. Not 2 though.
|04-28-2008 04:36 PM|
|Triple88a||Any one have the writeup in handy of how to use a relay on there? I remember seeing a write up of using large relays to eliminate this problem, but dont remember where since the last time some one discussed this was a while ago.|
|04-28-2008 03:56 PM|
|04-28-2008 02:29 PM|
|NY94YJ||nater, your trouble is Def the resistor. not sure how much...should be under $50...i gotta do mine to, just havn't botherd yet.|
|04-28-2008 02:26 PM|
|nater344||I have the same problem with mine...the switch only works on high. I've heard it usually isn't the switch. Is that correct? If so, is there a cheap solution?|
|04-28-2008 02:25 PM|
|4.0l sahara||If it's onlydead on 1 or 2 speeds it could be the resister pack.|
|04-28-2008 02:10 PM|
|Jerry Bransford||Is it dead on all speeds including the High-speed setting?|
|04-28-2008 01:53 PM|
I've read folks having trouble with the switch (dials) themselves...something about melting if memory serves. Replacing the switches fixes that.
There is a Resistor behined the glove box, they fail alot, but cause blower not to work on 1 or more of the low settings, Highest setting should work all the time becuase it is direct to battery.
There's threads on here about this. try search. And post up your solution!
|04-28-2008 01:39 PM|
I have a 99 TJ I just bought and can't get the blower to run on heat or a/c, it's not getting any fire to the switch. I checked all the fuses & relays I can find and there good. HELP don't want to go to a dealer !