|02-10-2013 09:59 AM|
|redmanwalking||Need a little clarification. Whats the wiring process for the new pig tail? How do I know which one is the ground? Any special route to take in getting this routed back to the transfer case?|
|08-18-2012 07:36 PM|
Never mind guys, I got it all in and works great!!! Thank you DP!
|08-17-2012 09:13 PM|
Hey DP, is the T/C case switch need to be polarized for the early YJs? Just curious as the switch does have the little slot in it.
Phnguyen, was this your issue or just didnt get a good ground?
Got the weatherpac harness today and my YJ up and running so tomorrow morning I should have a 4X4 light! Another of the hundred insane little issues solved!
|08-09-2012 07:14 PM|
|darkproximity||No problem man, glad you found it useful|
|08-09-2012 04:40 PM|
I thank you for this write up and I already have a new switch from O Reilly's it was a whole $5.99. I stupidly did not order the weatherpac harness thinking it would be on the shelf somewhere in this shithole of a town in Alabama. I am making money but I hate it here for that reason.
Anyway, I am going to lock my right axle together and do this mod so I know when the transfer case is in 4X4. My vac system is screwed and I dont feel like getting to know it. I understand it perfectly. It was a screwed up system since day one. I am not going to try bandaids to get mine working, I am going to eliminate it. My YJ will not run with the 4X4 system plugged up, I dont know if its the transfer case switch, the CAD or the tubing and I dont care to find out.
Just like DarkProximity said, get rid of the failure prone system. Easy and cost me less than $20.
|06-15-2012 05:04 PM|
|darkproximity||No, if they swap in another axle assembly.. Not every front axle has a CAD, and most people avoid CAD axles anyway when swapping.|
|06-15-2012 05:02 PM|
I believe he meant swapping out the stock front axle for a stronger unit.
Am I correct Darkproximity?
Either that or he turned it into a 2 wheeler???
Man, I just could NOT resist!
|06-15-2012 04:55 PM|
But when you say ditch the front axle are you
meaning RWD only?
then what would the point be in having a 4x4 light?
|06-15-2012 03:59 PM|
|darkproximity||You can do it this way for basically free.. I'd prefer to get rid of the problem completely, and again this is an option for people who ditch their front axle all together|
|06-15-2012 03:19 PM|
Dont get me wrong, the new switch and wiring is a great idea, but no need to spend $ the other way, and then you get a good common knowledge on how everything works.
I did the CV axle upgrade, but left the actuator on the shaft. The CV axle diameter is actually smaller than the original split axle shaft so nothing touches regardless. Even if i remove the inner fork it will still work the same. When i had originally done the job i too did not have the 4x4 light come on, then realized ( because i had also rebuilt my tranny) that the grommet was what was causing my issue.
Has worked ever since that last thread i posted about the job i did on my axles. So no further issues on my end.
Both ideas work. Just depends if you wanna spend the $ or keep it OEM either way its the same.
|06-15-2012 10:02 AM|
|06-15-2012 01:48 AM|
|06-15-2012 01:26 AM|
|06-14-2012 11:09 AM|
|Dr. Venture||might just be me being lazy, but all you guys have to do is just take the vacuum plug off and slice a thin section off, then plug it back onto the pipes again. I had changed my front axles to CV style, and just left the actuator on and plugged in. Leave and or remove the fork inside, thats all. Less hassles running wires, and switches and blah blah. Makes life easy.|
|06-14-2012 10:25 AM|
Need more info
|06-13-2012 10:56 PM|
|phnguyen7||I bought the switch and pigtail.. I hooked up one Side to the ground and the other to the black and yellow.. The light didn't turn on. Did I do something wrong?|
|05-15-2012 12:25 PM|
|89FLIslander||Just to finish out this issue, I got the hotwire run from the Posi-Lok actuator to the black/yellow wire and spliced in. Guess what? The 4wd indicator light on the dash worked! Here's the deal. It works when you engage the Posi-Lok, not when you move the 4wd shift lever. Makes sense because on the old vacuum system it worked when the (old) actuator moved due to the vacuum being applied from the transfer case. At any rate, now I have an "idiot light" to tell me when my front wheels are engaged!|
|05-08-2012 12:45 PM|
Hey no problems man, you have the solution and that is all that matters!
I'm just glad I could help being a newbie and all! LOL
Now wire it up, test it, and let us know it works!
|05-08-2012 12:29 PM|
Okay, as promised, here is the answer to the mystery. When installing a Posi-Lok, the instructions on how to hook up your factory 4wd indicator light are kinda vague (see above where I posted them). Here is what you do;
On the Posi-Lok actuator, there are two screw terminals on at the end of the unit. The top screw is your ground. The bottom scew is your "hot" lead. Follow the instructions to hook up the ground by simply making a 4" jumper and going from the top lug to one of the four bolts used to install the Posi-Lok actuator. The "hot" lead is a bit more problematic. Because it is on the right (passenger's side) of the front axle, there is not a good way to route the hot lead up to the switch without having a wire dangling underneath ready to be torn off. I used plastic ties and ran the hot lead back along the Posi-Lok cable up to where it came through the firewall, then pushed it into the wireloom to hide it.
NOW - For the part that had me stumped. The instructions say "cut and splice to the OEM wire". Doesn't tell you what color the OEM wire is (as I'm sure they change from model to model) nor does it tell you where to look other than "on some YJs the switch is under the battery tray". Mine wasn't.
On my 1989 Islander with straight 6 cyl. engine, the switch is mounted on the firewall between the battery box and the heater hoses, right by itself, in plain sight. A simple little vacuum switch with a black/yellow wire and a ground wire coming off it. Simply butt splice your hot lead into this black/yellow wire, OR, cut the wire off the vacuum switch and straight slice it into your hot lead. Then, if you want to, you can take the old vacuum switch off and throw it away! You're not using it anymore, anyway!
Thanks to Jamie Carr at Son of a Jeep in Panama City, FL for his help and expertise. Took him all of 2 minutes to point this switch and wire out to me and 1 minute was used opening the hood!
Thanks to jeff in rc on the forum. You were on the money with the black/yellow wire info. I just couldn't find it. I appreciate your trying to help.
|05-07-2012 08:52 PM|
|89FLIslander||Sorry for the double post. Computer decided to go nuts as I was posting the first one so I thought it didn't go. Will go back to the shop in Panama City tomorrow and see what the scoop is. Will post it as soon as I find out. Thanks again to all.|
|05-07-2012 07:17 PM|
|year1camaro||You need to change the indicator on the transfer case from ypur currrent year to a 95 xj.......the wires from the accuator to the new switch are only two wires ..... easy cheesy|
|05-07-2012 05:34 PM|
|89FLIslander||I have the straight 6 cyl 4.2 L engine. When the shop put the Posi-Lok on, they simply didn't run the hot wire from the actuator to the proper wire to turn the 4wd indicator light on, but they did run the ground wire. They were closed today so I couldn't call them but I will get in touch with them tomorrow. As for the blue/white vacuum hose, when they installed the Posi-Lok, they took the vacuum lines to the front axle out, so I don't know where it went. Anyway, if you'll watch the thread, I'll post the right color wire tomorrow so maybe it will help someone. Thanks for all of your help.|
|05-07-2012 05:23 PM|
|89FLIslander||I have the 4.0 (6 cyl). When the shop put the Posi-Lok in, they simply didn't run the "hot" wire from the actuator unit and butt splice it to the appropriate hot wire that goes to the light. They did run the gound wire. I just need to know which wire is the wire that goes to the 4wd indicator on the dash. Also, my '89 came with California emissions. There's more vacuum banjo work under that hood than most folks can understand. That's why my next move is a Nutter bypass to get all of that vacuum crap gone!|
|05-07-2012 05:10 PM|
If you have an "always on 4WD light" try this, turn the key on, check the light, if it's on unplug the suspected connector, does the light go out? If yes plug it back in, does it come back on? If yes there you go!
|05-07-2012 04:35 PM|
|89FLIslander||NEVER GIVE UP! Went back and looked again. Found a black/yellow wire (and another wire) coming out of a plug on the side of the transmission. It goes up to another plug which connects the two wires to two vacuum switches mounted in about the center of the firewall (over the end of the motor). Is that the right black/yellow wire?|
|05-07-2012 04:23 PM|
|89FLIslander||Seems like I'm bangin' my head against a wall (or the driveway) here. No blue/white vacuum line to be seen. No black/yellow striped wire either. Closest thing to it is a black and (possibly) yellow or pale green wire that is goes into a relay that is mounted on a bracket (between the battery and the fender). There are two relays mounted on that bracket. Sound close? Thank you for your reply!|
|05-07-2012 03:43 PM|
OK how about both where and what!
The BLACK with a YELLOW stripe is what you are looking for!
|05-07-2012 02:43 PM|
Nice article. Very complete and informative BUT I still have a small problem. I recently had a Posi-Loc installed on my '89 Islander and the shop didn't run the wire from the Posi-Lok actuator unit to the "OEM Vacuum switch" to make the 4wd indicator on the dash work.
The instructions that came with the Posi-Lok state;
IF THERE IS NO ELECTRICAL SWITCH ON THE ORIGINAL COVER:applications, see Fig. 16.
WITH ELECTRICAL SWITCH ON ORIGINAL COVER:
Cut off OEM terminal end, add #8 terminals to
wires; OE wires, either wire to either terminal
Make up 5” lead with #8 wire (supplied) and 1/4” lug
terminals and connect to upper cover mounting bolt
Route another line up to OEM vacuum switch; cut
and splice to "OEM wire" with butt splice provided. On
some YJ’s the switch is under the battery tray. For XJ
Can anyone tell me where or what color the "OEM wire" is that I need to butt splice into?
Thanks to all!
|04-23-2012 10:21 AM|
OK I found it!
While under the jeep for another reason I traced the vacume lines from the transfer case to the front axle and in between is the vacume motor. I proved it by disconnecting the wire and the 4WD light went out then re-connecting the wire and it came back on.
On to the new parts and pinning the front axle and I will be golden!
|04-17-2012 01:07 PM|
OK newbie questions here
I get where the "4wd vacume control switch" is on the transfer case.
I get where the "shift motor" is on the front axle.
I don't get where the "vacume motor" is with a 2 wire connector.
Sorry but I am new to Jeeps.
My stock YJ is having problems with vacume lines and I was thinking if I did this mod I would save myself some trouble down the road. That and I have an "always on" 4wd light.
I have also read somewhere here that I can remove the shift motor and "pin" it in place to keep the front axle in 4wd mode. Am I correct or am I full of it?
Thanks for any help you all can provide.
|This thread has more than 30 replies. Click here to review the whole thread.|