|05-08-2013 06:01 PM|
|05-08-2013 12:54 PM|
Hex Wrench for Door and Grab Handle Trim
Find a hex wrench that is the same size as the hex bolt in the trim. Insert so that the hex wrench is snug. Gently tilt hex one way so it is catching the inside of the "bolt" and gently pull. The trim should come right out.
|08-15-2012 10:32 PM|
|billiam||did you remove the door handle and oh shit handle? if so how|
|06-24-2012 07:31 PM|
The lighting makes it look a little yellow on the edge off the glove box handle, but the door trim is near match to the door edge as you can see
|06-18-2012 09:10 AM|
The rust oleum that I used didn't need primer. I did 4 light coats and it came out fantastically.
|06-17-2012 05:19 PM|
Did you prime these before painting, or just spray and go?
|06-17-2012 04:41 PM|
Ok so I'm doing all 4 door handle grabs, the bevels and the sh1t bar insert orange.
I'm excited, the paint I bought looks really great.
|06-17-2012 03:44 PM|
|orngcrushrgrl||You're not actually pushing back. You hafta line up the holes, stick the screw driver in and then turn the bevel.|
|06-17-2012 12:50 PM|
|06-17-2012 12:48 PM|
Use the vid. I just went and pulled one of mine and took a close up for you to see the lever you are pushing down with the screwdriver. It can be tricky to get on top of it instead of under it so just play with it a bit. They turn out really easy so if you're forcing it you don't have the lever pushed down.
Also be really gentle with the tabs when pulling the trim off the vents. They're thin and crack easy.
I love how mine turned out. We just did hubby's yesterday too. It's a really cool cheap way to make it your own.
|06-17-2012 12:43 PM|
I was thinking about doing this to my crush too, as well as the door inserts and the Jeep insert on the oh sh*t glove compartment handle.
I even found factory replacement paint to match our color code already!
2012 Jeep All Models Touch Up Paint Colors
|06-17-2012 11:53 AM|
a quick search on google for this video i remembered seeing a while back for air vent removal.
Removing A/C Vents in 2011+ JK Wrangler - YouTube
|06-17-2012 11:32 AM|
vent bevel painting
Hi all, I've searched for it on here, but seem to be having no luck finding it if it's on here.
I'm looking for a how to of sorts on removing the silver round vent thingies (technical term, yes I know) and painting them a different color..
Gotta know how to remove them and replace them as well as what paints some of you may have used???
any help would be greatly appreciated!