|08-13-2008 12:26 AM|
|George T.||dont have to crawl . I have the hood and fenders off. I took a quick glance down at the steering box but got skurred when i seen all the pipes and hoses and bolts. Im a relative newbie to all this and dont want to break anything too expensive quite yet.|
|08-13-2008 12:22 AM|
Have you even crawled under there to look at it? There has to be a simple way to get it free without spending money.
|08-13-2008 12:18 AM|
|George T.||I was just going to take the upper u-joint off of the steering column and that way the steering assembly would be free from the tub when I lift it. But no parts store or the stealership sell the ujoints individually and said I would have to buy the whole shaft. Do i have to disconnect from the steeering shaft or is there an easier way?|
|08-13-2008 12:01 AM|
|MR.CLIFFORD||and what part do you need to replace?|
|08-13-2008 12:00 AM|
|George T.||sorry broham. I am removing the body off of the frame to rehab the frame a little bit.|
|08-12-2008 06:08 PM|
I take it you have a 94 YJ H.O? Your post isn't very specific about your problem. Do you need to replace the steering column or the joint in front of the firewall?
I got a complete steering column from Davey at http://daveysjeeps.com/ for a stupid cheap price. Call him first before you go to the stealership.
|08-12-2008 03:25 PM|
Removing the steering wheel...
I have pull the steering wheel already. I am wondering do I have to disconnect the steering shaft via the u-joint from the part that goes through the tub and connects to the steering wheel?
Is there a way that I do not have to disconnect the ujoint?
I just went to the stealership and said I would have to buy an all new steering shaft for $250 and that they dont offer just the steering shaft ujoint. Does anyone know if/where I can find just the u-joint?
Thanks for the help.