|07-09-2012 10:37 PM|
|06-15-2012 12:02 AM|
|willybTJ||It happens man. Every project I do I ends up with a problem....just my luck. Let me know how the interior light mod goes.|
|06-14-2012 04:03 PM|
Got them working, ur was not grounded
Thanks for the help, and inspiration for my next project. Pics will be up soon
|06-12-2012 10:19 AM|
|lindel||Check and make sure you've got a ground for the lights, no ground, no workie!|
|06-12-2012 01:02 AM|
|JeepersCreep3rs||Thanks for the help, going to continue working on it tomorrow. Nice rig btw. Where did you get your gauge cluster? I like the set up/color, i have a blue jeep and it would look sweet in there.|
|06-12-2012 12:07 AM|
I would re-check the fuses. Make sure that there aren't any additional fuses that your overlooking. I know the fogs for example have a fuse behind the glove box, as well as one in the engine fuse block.
It really sounds like a blown fuse, although you have already checked them. You could have blown it if the resister didn't have a good ground.
I installed LED tail lights on mine (different kind) and I had to get a dremmel and take some paint of underneath to get a good ground for the clip.
|06-11-2012 09:35 PM|
|JeepersCreep3rs||BUMP need help!!!!|
|06-11-2012 09:25 PM|
HELP!!!! Installing LED taillights
I have a 2002 TJ and I picked up a pair of Anzo USA Universal Clear LED Replacement Taillights. I tried wiring them and the brake and reverse lights would not come on, i then tried with the stock one and same thing. Looked at all fuses and they are fine attached is the new lights, old lights, and the new wiring diagram.