|Today 06:37 PM|
|Vintage||Can anyone tell me what these front and rear bumpers are? And if anyone has heard anything on their quality? Would credit pic sources, but don't know where they came from.|
|12-23-2014 05:44 PM|
|1up5down||My cheapy e-Autogrille front bumper. Not the best in quality but the mounting was spot on. I had to re-drill and reinforce the bolt holes to fit a Warn Zeon 10-S and my light mounting tabs were not evenly welded on the hoop. I had to compensate with washers when I mounted my light bar. Thankfully I'm a former welder and not afraid to modify heavy steel.|
|12-20-2014 09:12 PM|
|12-20-2014 07:17 PM|
|12-20-2014 05:38 PM|
|mbcgriffinfan||Road Armor front bumper|
|12-20-2014 01:19 AM|
|IMDaveReynolds||Here is a better pic of the full-width Rock Hard Front bumper. The thing is a beast. Heavy, but really solid. The rear is nice also.|
|12-19-2014 01:08 PM|
|12-18-2014 09:20 PM|
|12-17-2014 02:35 PM|
I've seen a lot of people flat tow with the d-ring mounts as well. They're also stout enough for recovery tugs so I don't think you'd have any issues whatsoever. Enjoy the bumper!
|12-16-2014 08:20 PM|
Having said that, lots of guys use the d ring mounts to flat tow their Jeep. Warrior Products makes adapters specifically for that purpose. Of course you have to be safe and use safety chains and an auxiliary brake system.
I used a similar set up with my old TJ and some bolt on brackets and a Falcon 5200 tow bar. Worked well.
|12-16-2014 07:42 PM|
FWIW I would NOT tow the vehicle using the bumper D-Rings. It may not be legal, and I wouldn't trust the Chinese welds.
On another note, the barricade bumper is a nice piece. I had three delivered damaged and like the style and price. Just couldn't hold out hope for one being delivered in good shape.
|12-16-2014 10:06 AM|
|freeltm||I like the Barricade. Install was very easy. I did have to drill one of the frame holes out because it was a little too small. Weighs more than factory but I don't see any sag. I was actually a little concerned about that. I'm very pleased with the look. I plan to use the "D" ring mounts as an attachment point to tow the Jeep behind my camper.|
|12-15-2014 09:03 PM|
|12-15-2014 10:37 AM|
Installed On Saturday
|12-14-2014 11:06 PM|
|12-14-2014 04:41 PM|
|12-14-2014 06:27 AM|
|12-13-2014 01:01 PM|
|DigitalNurd||Just installed my Rugged Ridge bumper this past week....I love it!|
|12-12-2014 08:34 AM|
|12-12-2014 07:31 AM|
|12-12-2014 07:29 AM|
|12-07-2014 11:07 PM|
|elk2503||Haven't heard of hansen before, anyone got any information on them?|
|12-07-2014 10:57 AM|
LoD Armor Lite Shorty - 2 stage coating w/ skid plate
|12-01-2014 10:58 PM|
|Husker Bucco||They have a ton of pics on their website. Hardcore Offroad, LLC - Home|
|12-01-2014 08:13 PM|
|12-01-2014 07:47 PM|
|Husker Bucco||Unfortunately not.|
|12-01-2014 07:03 PM|
|12-01-2014 01:53 PM|
Hardcore Offroad LLC. Small fab shop in Weedville Pa that makes a small number of Jeep bumpers. Very sturdy and well made. Coating feels like it's very thick compared to my Body Armor rear bumper.
|12-01-2014 01:26 AM|
|11-30-2014 09:21 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|