|09-09-2008 07:41 PM|
|1BLKJP||Mine are home made and were pretty simple. 3/16ths plate up to the door frame and then a 2" section welded to the bottom of that protects the bottom of the tub. Just measured between the fender flares at the top of the door frame and then again at the bottom.|
|09-09-2008 07:20 PM|
|rketr||Before picking up a GenRight comp cut kit (it included the rock rails) was going to build a set using 1/4" x 4" x 4" angle. Idea was to basically just cut to length and then drill and mount. Very simple and should only really cost ~ $30 for the angle...|
|09-09-2008 05:43 PM|
I am thinking about fabbin up some Rock Rails for my Rubi. Was wondering if anyone else has a set of homemade... Maybe some pictures and a write up? Either that or some sturdy suggestions....
Thanks guys in advance!