|08-12-2012 09:49 AM|
Would like to see any pics jk on 16x8 wheel with 12.5 tire width with backspacing between 4.5 and 5 . Just to see How far would my tires stick out past my fenders.
|08-11-2012 03:39 PM|
I can tell you with an aev lift that will work. Not sure about others. I hear other lifts use different sway bar links that stick out further.
For reference the aev brand wheels have a 5.2" backspace and they test and claim 35" tires that are 12.5" wide have no rub. So your tires would be a little bit further out than theirs. Of course they would stick out past the fenders the same amount more.
|08-11-2012 03:35 PM|
|Jcole231||U should be ok, a friend of mine has 5+" of back spacing on 17" xd monsters and has no issues with 35" km2s. Duratracs run a good bit smaller in height and width also|
|08-11-2012 03:09 PM|
Ultra wheel 16x8 (194-6873B) backsapcing 4 7/8 with 35" Duratrac 315/75r16
with 3" suspension lift. I'm know with a backspacing of 4.5 would be ok...but with a 4 7/8 ?
|08-11-2012 01:14 PM|
|kneeman||Can you list the wheel and tire and lift you are thinking about using?|
|08-10-2012 07:54 PM|
315/75r16 on 16x8 bs 4 7/8 question
Is someone have or had this Setup : 315/75r16 with a 16x8 backspacing wheel of 4 7/8 and a 3" suspension lift without wheel spacer ?? I'm wondering if i'll rub in flex or when steering gonna be full axle ?
For now I'm with 285/75r16 and it's ok and I'm looking for to move to 35"...but I would like to avoid using spacer....Could I ??
If I need spacer with this setup I'll be to much out the fenders..
Thanks for helps !