|08-23-2012 10:48 AM|
|mickeygriffin||shocks n springs are cool just for a DD, correct?|
|08-23-2012 10:29 AM|
|JustJeepers||Thanks for all the info!! It's my DD and I haven't had the chance to take it off road yet, except to the beach. That was pretty fun!! So I basically wanna beef it up. Maybe I'll wait til I hit some trails so I can have a better idea of what kind of trail riding I plan on doing.|
|08-22-2012 01:30 PM|
35" tires d44/9" swap stock springs
|08-22-2012 11:32 AM|
~2" over stock on 35's. It aint cheap or easy if you want it to work right. Very old picture.
|08-22-2012 11:27 AM|
|fabrikate_it||Also I will add my winch dropped me 3/4" and the ZJ springs brought me back up 2 1/2" from there so I'm only 1 3/4" over stock height|
|08-22-2012 11:24 AM|
|fabrikate_it||Grrrr what happened to ingenuity and building shit? I have flat tub width tube fenders and no rear flares cleared 33's fine disconnected offroad and didn't rub I now have ZJ front coils and my front springs with 1 full coil cut off on the rear on 34's my wheels have 3 5/8" backspace and I do not rub and my jeep has gone everywhere I have taken it on a side note I still only have 3.73 gears and get around just fine drove my turd to work today in fact and it's all highway.|
|08-22-2012 11:14 AM|
|08-22-2012 10:52 AM|
|Bone||With a 2" spacer lift and 3.75" back spacing you can fit 33" tires on your jeep, however, you will be limited on wheel travel (never disconnect your sway bar with this set up) and this will be for looks more than off road function. I'd still recommend trimming your stock fender flares. I've seen A LOT of Jeeps with this set up, mostly because it "looks better". It certainly is not going to be more off road capable. If you want more wheel travel, you'll need a 4" suspension lift (SYE is NOT always required, you'll have to drive it first to find out) but again, this isn't making it an off-road monster without several other mods first (especially gearing).|
|08-22-2012 10:30 AM|
Ever notice most of the LCG guys with highline fenders have a small lift and relocating shock mounts?
|08-22-2012 10:24 AM|
|08-22-2012 10:15 AM|
33's are fit in two common ways on TJ's:
1. 4" suspension lift, with ~2" bumpstop extensions in front and ~2.5" in the rear. Requires a SYE/CV shaft.
2. 2.5" suspension lift, with a 1.25" body lift, with ~1-1.25" bumpstop extensions in front and ~1.25-1.5" in the rear. The 1.25" BL usually accompanies a 1" Motor Mount Lift to offset some of the driveline angles.
Either way you go, figure on some or many of the following components: longer front brake lines, extended sway bar links front and rear, gears, brake and steering upgrades to accommodate larger tires, SYE, CV shaft, bumpstop extensions, new shocks, adjustable track bars, and a rear track bar bracket.
|08-22-2012 10:11 AM|
You should search, you could easily answer this question and get pictures of what you are looking for.
You either need a lift or new/modified front fenders to make 33s work. You will also need new wheels with smaller backspacing.
|08-22-2012 09:57 AM|
Bigger tires w/o a lift
So I currently have 31 x 10.50 size tires but I would like to go up to maybe 33's. Is this possible to do without adding a lift kit or will the tires rub? Also, are there any websites out there that can show you what your jeep will look like with bigger tires or with a lift kit so one can get to see what it would look like before spending the money on a lift. (Probably a dumb question, but thought I'd ask anyway!)