|08-23-2012 06:04 PM|
|Derek1883||Yup. Throwout bearing is bad. And because I neglected it for such a long time they might need to replace the input shaft. Hopefully they don't have to, but learn from my mistake.|
|08-19-2012 12:56 PM|
|Derek1883||I've made arrangements Tuesday with AAA to have them take a look at it. Although I'm fairly confident it's the throwout bearing. When they tell me for sure ill update the thread.|
|07-31-2012 10:39 PM|
|07-31-2012 05:38 PM|
|Derek1883||Hahaha! That is hilarious! I think you've nailed the problem!|
|06-28-2012 07:58 AM|
Everything said so far is good advice. But if I were you, I would check underneath for one of these....
|06-28-2012 04:38 AM|
|Derek1883||Sorry for not replying, I still haven't had it looked at. And whatever it is, being throwout bearing or the pressure plate, it most definitely has to be the transmission. As of late, I have had some issue shifting into 2nd and 3rd with some grinding, even with the clutch all the way in. I will hopefully have it looked and fixed before July ends.|
|06-12-2012 09:26 AM|
I have seen a throwout bearing make that noise, but I personally had one of the springs break on the pressure plate (Part of the clutch assembly) and make a noise like that.
|04-18-2012 10:29 PM|
|04-04-2012 03:56 PM|
|Derek1883||I'm assuming that would be the transmission right? Would it be an easy fix, or is it best to leave it to a mechanic?|
|04-04-2012 03:49 PM|
|div4gold||I would suspect the throwout bearing.|
|04-04-2012 03:31 PM|
Noise from under my Jeep
This is my first time post/thread, so please bear with me.
I have a 2001 TJ 4.0l 5speed with about 144k miles. I have owned the jeep since 2008, and about a year ago my clutch went out. In January(I hope this is of relevance), my jeep was ran into in my neighborhood, actually costing $7,000 in damages. The auto shop fixed everything, even giving me a brand new front axle. So I am not sure if this would be a factor in what im dealing with.
So here is the "issue". Yesterday, at the college I commute to, I put the jeep into first gear and I heard rattling noise that came from underneath the stick shift. The Rattle noise was brief, and then a squeaking noise happened. And this has never happened, i figured that i would rev up the engine a bit, and the rattling/squeky noise was "in tune" or would match the revving of my engine. I assume, even though I am a Noob, that it would have to be clutch/transmission related.
Please throw out some ideas, or similiar experiences. If I can do it myself, it would be awesome, because im a poor college student!