|08-29-2012 09:27 PM|
|relgnarw peej 2002||
|08-29-2012 12:42 PM|
|08-29-2012 10:43 AM|
|MarkGLHS||i did not have a paint code the shop matched it to the interior (the dash) using some optical device they place onto the surface and it creates a program for a color.|
|08-29-2012 10:12 AM|
|Neil F.||How are you painting it. Rattle can, custom mix spray or having a shop do it?|
|08-29-2012 08:42 AM|
|gmabry75||Anybody have a paint code for the tan top. Wanting to paint mine which is currently black.|
|08-25-2012 11:27 AM|
|Neil F.||Check the gasket around glass opening. Mine had pulled to one side and was not quite all the way to the bottom and leaked there.|
|08-22-2012 11:54 AM|
I think its coming in around the pass. side corner where the top and door and window meet.
And at the back window and tailgate area.
This top is actually a two piece top. The original hardtop (2000 TJ) got damaged by hail and the PO bought this one.
|08-22-2012 11:31 AM|
|08-22-2012 11:25 AM|
|gmabry75||Looks great. That is one of my next projects on my green Sahara.|
|08-22-2012 10:45 AM|
here's a pix of my top after the paint work. Jeep painted the top to match the light brown carpeting I have in my Sahara but I had the paint shop match the color of the seats, dash, and door panels which are all a light tan (Camel). I think the lighter colored top looks better on a dark colored Wrangler.
|08-22-2012 09:12 AM|
|TNSarge||Might be a little off topic but still about hard top's. I know they all pretty much leak but mine leaks real bad. Passenger side corner by the window and passenger side rear by the rear window. Where can I find some sort of weather stripping to maybe seal up some of the leaks. What works best.|
|08-22-2012 08:56 AM|
|08-22-2012 03:01 AM|
i just had my hard top painted by a pro shop in base coat clear coat last week. looks fantastic, what an improvement over the factory's dull finish.
they prepared it with Scotchbrite pads, sealer primer, then the base and clear. no need for color sanding.
cost was $400 but it was well worth it as they warranty the paint as long as I own it.
|08-22-2012 12:54 AM|
|Dextreme||I washed my HardTop, taped off the windows and vents, then rattle canned it with Krylon Fusion. Looks like brand new.|
|08-21-2012 11:31 PM|
|relgnarw peej 2002||you could hit it with some 421-40™ HS Polyester Spray. It's much easier than tryin to smooth it out. I sprayed two good coats then sanded smooth with 180 grit and 320 then sprayed two uniform coats with nason high build 421 primer. After that I sprayed 2 coats of nason classic black base coat and cleared it with some nason clear. I went with nason cause I was on a budget at the time but the top is still shiny and in good shape from what I can tell when I pass him in traffic (him)=new owner lol|
|08-21-2012 06:19 PM|
|Shoe||The new jeeps with the color matched tops look good, but I think the old tops with the texture surface probably wouldn't look right shiny. It would take a lot of sanding and filling to make it smooth enough to look good.|
|08-21-2012 05:50 PM|
Painting a hard top?
Has anyone ever painted a hard top using a base coat and a clear coat? If so, did it look ok or did it look too shinny and make it look funny?