|09-12-2012 09:25 PM|
|Dtoxin||Thanks for your insight gents. My local u-pull it is absolutely stripped of jeeps usually... i'll probably have to buy new.|
|09-12-2012 09:56 AM|
|geiman||No, $15 isn't expensive, but there is no way I'd pay $15/piece plus shipping (so over $60) for four jounce bumpers when I can get them for probably $1/piece at a local junk yard. I'll take any chance I can get to save $56+ for the next Jeep mod.|
|09-12-2012 09:53 AM|
|tbensor||Thanks. lol $15 dollars is not expensive. I just payed $168 for the ones on my Duramax. Granted they were upgraded versions made from poly and also heavier duty.|
|09-12-2012 09:09 AM|
If the jounce bumper is deteriorating, you can buy new ones from somewhere like here:
Repair Parts: MoparOnlineParts.com
But they're kind of expensive for what they are. If they really need replaced, I'd either go to a local junk yard and buy a handful for a few dollars or check here:
D A V E Y S J E E P S . C O M - Parts Specials
If you search that page for bump stop, you'll see the listing for TJ bump stops for $10 a pair.
|09-12-2012 08:31 AM|
|tbensor||I think his bumpstops are deteriorating. Mine are too and i would like to know what the best (cheapest) ones to get are.|
|09-12-2012 07:42 AM|
you need nothing from quadratec.
what you need is a wire brush and a rattle can of paint from your local hardware store.
|09-11-2012 11:23 PM|
See that ugly rusted up thing inside the spring? I need to replace that, its horrifying to look at. I believe that is the bumpstop? please correct me if I'm wrong, I'm new at this. I have a stock set up, what do I need off of a site like quadratec to just get something a bit better looking in there without breaking the bank.