|09-17-2012 06:40 PM|
Are you sure the fan is vibrating or is something caught inside the fan itself?? My fan was making a horrible "vibration" sound that turned out to be a cellophane wrapper from a pack of gum. Anyway, here are some instructions:
I just removed the blower motor on my 2006 LJ a few days ago. It is a simple procedure, but a real PITA because you cant really see anything you are working on.
1. unplug the wire harness leading to the blower motor on the right hand side of the motor (as you are looking at it)
2. feel around the backside of the blower assembly at the 1 to 2 o clock position around the edge; you will feel a "tab" that must be bent down.
3. Bend the "tab" down (careful, it breaks easy) and simultaneously rotate the whole blower assembly counter clockwise.
4. the assembly will twist out and you may have to work it around to get it out.
Reverse the above to get it back in.
Once you do it, it will take you 5 mins next time.
|09-17-2012 10:09 AM|
|Wattapunk||Blower motor on your '05 is located behind the glovebox. Remove the under panel to access the motor. I believe there are tabs on the motor that hold it in place. More than likely you will have to replace the whole unit if it's making noise or coming loose off the shaft.|
|09-16-2012 09:41 PM|
Are there any studs with nuts sticking out of the firewall on the underhood side?
I don't know. Never had mine out, but just thinking...
Welcome to the forum!
|09-16-2012 08:18 PM|
Stupid blower motor question
Dumb question, I know, but my blower motor is loose and vibrates really bad when you turn the A/C on. All I need to do is tighten the thing up but I can't figure out what needs to be tightened. I saw a few hex head bolts holding the cover on but none of them are loose. It's almost like there's something on the underside that needs to be tightened but dang if I can find anything. Thoughts?